Groz 45 degree angle stainless steel grease nipples

Groz 45 degree angle stainless steel grease nipples
Rate this Product: 
No votes yet
45 degree angle stainless steel grease nipples

Groz grease nipples are manufactured to the most stringent quality standards - TS16949 approved. Fitting profile and dimensions are accurately controlled and conform to SAE, DIN,BS, JIS & IS standards. Grease fittings are heat treated to SAE J534 specification with hardness on greasing end to a minimum of 83 on Rockwell 15N scale with a case depth of 0.005" (0.13mm) to 0.009" (0.23mm). Fittings with ball check use heat treated springs for increased life. Steel fittings are plated in yellow zinc with a plating thickness of 0.0002" (5 microns) confirming to SAE J534 specification and have a guaranteed salt spray life of over 75 hours to red rust.

Available models

Part No. Description Thread length Shank length Overall length Hex size
ZGFTSS182845 1/8" BSPT 45˚ angle 3.75mm min 5.5mm max 21mm max 7/16" or 11mm
ZGFTSS182745 1/8" NPT 45˚ angle 5.6mm min 7.6mm 21.8mm 7/16"
ZGFTSS141945 1/4" BSPT 45˚ angle 4.2mm min 6.5mm 22.5mm 14mm or 9/16"
ZGFTSS8145 M8 x 1 taper 45˚ angle 3.75mm min 5.5mm max 21mm max 23/64" or 9mm
ZGFTSS6145 M6 x 1 taper 45˚ angle 3.75mm min 5.5mm max 21mm max 23/64" or 9mm
ZGFTSS142845 UNF 1/4" UN 45˚ angle 3.3mm min 5.1mm 20.8mm 3/8"