Groz 90 degree angle steel grease nipples

Groz 90 degree angle steel grease nipples
Rate this Product: 
No votes yet
90 degree angle steel grease nipples

Groz grease nipples are manufactured to the most stringent quality standards - TS16949 approved. Fitting profile and dimensions are accurately controlled and conform to SAE, DIN,BS, JIS & IS standards. Grease fittings are heat treated to SAE J534 specification with hardness on greasing end to a minimum of 83 on Rockwell 15N scale with a case depth of 0.005" (0.13mm) to 0.009" (0.23mm). Fittings with ball check use heat treated springs for increased life. Steel fittings are plated in yellow zinc with a plating thickness of 0.0002" (5 microns) confirming to SAE J534 specification and have a guaranteed salt spray life of over 75 hours to red rust.

Available models

Part No. Description Thread length Shank length Overall length Hex size
ZGFTR182890 1/8" BSPT 90 degree angle 3.75mm min 5.5mm max 18mm 11mm
ZGFTR141990 1/4" BSPT 90 degree angle 4.2mm min 6.5mm 22mm 14mm or 9/16"
ZGFT8190 M8 x 1 taper 90 degree angle 3.75mm min 5.5mm max 18mm max 9mm
ZGFT182790 1/8" NPT 90 degree angle 5.6mm min 7.6 mm 6.5mm 21.3mm 7/16"
ZGFT141890 1/4" NPT 90 degree angle 5.75mm min 9.27mm 24mm 9/16"
ZGFT6190 M6 x 1 90 degree angle 3.75mm min 5.5mm max 18mm max 9mm