Redashe Logo

Redashe N3020 anti-static gun

Redashe N3020 anti-static gun

The new IONSTAR antistatic-gun from Redashe neutralises static and cleans in one operation. Once connected to the compressed air system, it generates the necessary energy via an integrated turbine generator built into the air gun, creating a powerful stream of positive and negative ions. The IONSTAR requires no power cables or battery-packs.

Redashe N3001 anti-static gun

Redashe N3001 anti-static gun

Static electricity is a problem in many paintshops and many paint defects may be caused by this invisible problem. The Redashe anti-static gun will help eliminate static electricity, defects i.e. Dust and overspray clinging to the panel, these problems are easy to cure. Static electricity is generated during the repair process each time the DA passes over the surface a charge is generated, wiping the panel with a cloth, heating and cooling the panel.

Redashe NAS1650-RJ20S Spotblaster

Redashe NAS1650-RJ20S Spotblaster

Initial experience gained in rust control in the automotive field with a spot blaster system has led to Redashe’s development of a specially-adapted anti-static Spotblaster to cope with aircraft corrosion. The equipment, an air-powered closed system device, is the result of close co-operation with the RAF. It can be used almost anywhere on an aircraft, even in the most inaccessible areas, such as inside wings. Precise blasting pressure control ensures that no panel damage occurs.

EPP-UK Hydraulic Paper Baler

EPP-UK Hydraulic Paper Baler

The EPP-UK baler is a hydraulically powered baling machine for compaction of cardboard and plastic waste. The unit is powered from a single phase mains supply and controlled via a side mounted control box. This unit is fitted with a variety of interlocks and sensors to ensure safe operation by trained personnel.

Recommended for workshops, accident repair centres, manufacturing plants, logistics centres and multi product recycling plants.

TRB6300 Flexible Hybrid Polymer Hose 1/2’’ x 30m

TRB6300 Flexible Hybrid Polymer Hose 1/2’’ x 30m

This flexible hybrid polymer hose has zero memory allowing it to lay-flat and not work against you during operation.

Redashe IF-FAW-C-1000 Compact Mixing Room Increased Safety Heater

Redashe IF-FAW-C-1000 Compact Mixing Room Increased Safety Heater

The Redashe increased safety safety heaters feature all stainless steel or powder coated construction. Why do you need an increased safety heater? All areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified and marked with the 'EX' symbol. Most automotive paint manufacturers recommend that water based paints should be stored at an ambient temperature of not below 5°c and mixed above 15°c.

Redashe IF-FAW-C-750 Compact Mixing Room Increased Safety Heater

Redashe IF-FAW-C-750 Compact Mixing Room Increased Safety Heater

The Redashe increased safety safety heaters feature all stainless steel or powder coated construction. Why do you need an increased safety heater? All areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified and marked with the 'EX' symbol. Most automotive paint manufacturers recommend that water based paints should be stored at an ambient temperature of not below 5°c and mixed above 15°c.

Redashe IF-FAW-C-500 Compact Mixing Room Increased Safety Heater

Redashe IF-FAW-C-500 Compact Mixing Room Increased Safety Heater

The Redashe increased safety safety heaters feature all stainless steel or powder coated construction. Why do you need an increased safety heater? All areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified and marked with the 'EX' symbol. Most automotive paint manufacturers recommend that water based paints should be stored at an ambient temperature of not below 5°c and mixed above 15°c.

Redashe IF-FAW-C-250 Compact Mixing Room Increased Safety Heater

Redashe IF-FAW-C-250 Compact Mixing Room Increased Safety Heater

The Redashe increased safety safety heaters feature all stainless steel or powder coated construction. Why do you need an increased safety heater? All areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified and marked with the 'EX' symbol. Most automotive paint manufacturers recommend that water based paints should be stored at an ambient temperature of not below 5°c and mixed above 15°c.

Redashe IF-3000 Mixing Room Increased Safety Heater

Redashe IF-3000 Mixing Room Increased Safety Heater

The Redashe increased safety safety heaters feature all stainless steel or powder coated construction. Why do you need an increased safety heater? All areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified and marked with the 'EX' symbol. Most automotive paint manufacturers recommend that water based paints should be stored at an ambient temperature of not below 5°c and mixed above 15°c.

Redashe IF-2500 Mixing Room Increased Safety Heater

Redashe IF-2500 Mixing Room Increased Safety Heater

The Redashe increased safety safety heaters feature all stainless steel or powder coated construction. Why do you need an increased safety heater? All areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified and marked with the 'EX' symbol. Most automotive paint manufacturers recommend that water based paints should be stored at an ambient temperature of not below 5°c and mixed above 15°c.

Redashe IF-2000 Mixing Room Increased Safety Heater

Redashe IF-2000 Mixing Room Increased Safety Heater

The Redashe increased safety safety heaters feature all stainless steel or powder coated construction. Why do you need an increased safety heater? All areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified and marked with the 'EX' symbol. Most automotive paint manufacturers recommend that water based paints should be stored at an ambient temperature of not below 5°c and mixed above 15°c.

Redashe IF-1500 Mixing Room Increased Safety Heater

Redashe IF-1500 Mixing Room Increased Safety Heater

The Redashe increased safety safety heaters feature all stainless steel or powder coated construction. Why do you need an increased safety heater? All areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified and marked with the 'EX' symbol. Most automotive paint manufacturers recommend that water based paints should be stored at an ambient temperature of not below 5°c and mixed above 15°c.

Redashe IF-1000 Mixing Room Increased Safety Heater

Redashe IF-1000 Mixing Room Increased Safety Heater

The Redashe increased safety safety heaters feature all stainless steel or powder coated construction. Why do you need an increased safety heater? All areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified and marked with the 'EX' symbol. Most automotive paint manufacturers recommend that water based paints should be stored at an ambient temperature of not below 5°c and mixed above 15°c.

Redashe IF-750 Mixing Room Increased Safety Heater

Redashe IF-750 Mixing Room Increased Safety Heater

The Redashe increased safety safety heaters feature all stainless steel or powder coated construction. Why do you need an increased safety heater? All areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified and marked with the 'EX' symbol. Most automotive paint manufacturers recommend that water based paints should be stored at an ambient temperature of not below 5°c and mixed above 15°c.

Redashe IF-500 Mixing Room Increased Safety Heater

Redashe IF-500 Mixing Room Increased Safety Heater

The Redashe increased safety safety heaters feature all stainless steel or powder coated construction. Why do you need an increased safety heater? All areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified and marked with the 'EX' symbol. Most automotive paint manufacturers recommend that water based paints should be stored at an ambient temperature of not below 5°c and mixed above 15°c.

Redashe IF-250 Mixing Room Increased Safety Heater

Redashe IF-250 Mixing Room Increased Safety Heater

The Redashe increased safety safety heaters feature all stainless steel or powder coated construction. Why do you need an increased safety heater? All areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified and marked with the 'EX' symbol. Most automotive paint manufacturers recommend that water based paints should be stored at an ambient temperature of not below 5°c and mixed above 15°c.

Redashe ZGRAVAD6 IBC gravity AdBlue dispensing kit

Redashe ZGRAVAD6 IBC gravity AdBlue dispensing kit

Designed specifically for use to dispense AdBlue from IBCs using the bottom outlet connection. Comes complete with all fittings/connections required, each kit includes swivelling S60x6 female buttress IBC adaptor (makes installation easy), ZABN34 Adblue Nozzle and 6m hose. 

Redashe ZGRAVAD4 IBC gravity AdBlue dispensing kit

Redashe ZGRAVAD4 IBC gravity AdBlue dispensing kit

Designed specifically for use to dispense AdBlue from IBCs using the bottom outlet connection. Comes complete with all fittings/connections required, each kit includes swivelling S60x6 female buttress IBC adaptor (makes installation easy), ZABN34 Adblue Nozzle and 4m hose. 

IRT R800443 4 PREPCURE

IRT R800443 4 PREPCURE

Speeds up the drying process of putty, filler and clearcoat with two digital timers.

Redashe YZ6185-PCR spring rewind cable reel

Redashe YZ6185-PCR spring rewind cable reel

The Redashe 240v spring rewind cable reel has been developed for the modern industrial, automotive and construction industries. They are a must to replace tangled extension cables and are designed for a more permanent solution to cable storage. These units give long lasting and trouble free performance.

Hose reel covers

Hose reel covers

This innovative product eliminates the problem of site hose reels freezing. The jackets are designed to be retro-fitted over the existing hose reel. This can prevent the need for expensive fibreglass enclosures and space heaters.

IRT Infrared and UV curing

IRT Infrared and UV curing

IRT by Hedson offers a wide selection of Short-wave Infrared (IR) and ultraviolet (UVA) mobile dryers and each model has its own area of use. IRT products are user-friendly and are easy to move around in the workshop or can even be placed in the spray booth. For further details on the range, please don’t hesitate to contact Redashe

Herkules Flexible solutions for the workshop

Herkules Flexible solutions for the workshop

The perfect range of lifts suitable for body and paint shops as well as tyre shops. The lifts are easy to install and use the latest pneumatic lifting technology, making them silicone free (PWIS-Free which stands for paint-wetting impairment substances). Lifts the vehicle to the optimum working height to prevent fatigue and long term health problems by allowing the operative to work in an upright position, also increasing work efficiency. Can be mounted on-ground or in-ground to meet differing demands. For further details on the range, please don’t hesitate to contact Redashe.

Tecna ATEX tool balancers

Tecna ATEX tool balancers

Capacities ranging from 4 – 100 Kgs and a stroke up to 2.7m

TECNA S.p.A. produces a range of BALANCERS suitable to be installed in potentially explosive areas composed by flammable gases or combustible dusts.

Redashe J40015.1 Washer 1800 E Power top loading parts cleaner

Redashe J40015.1 Washer 1800 E Power top loading parts cleaner

Redashe top loading parts cleaners are designed to free up technicians from washing dirty greasy parts by hand, simply place the part to be cleaned in the basket close the lid turn it on and walk away, allowing other tasks to be carried out, the units are designed to work with a wide range of aqueous cleaning solutions and has a built in heating element which allows the fluid to be heated.

Manufactured from 304 stainless steel the units are robust and built to last

Redashe J40011.1 Washer 1500 E Power top loading parts cleaner

Redashe J40011.1 Washer 1500 E Power top loading parts cleaner

Redashe top loading parts cleaners are designed to free up technicians from washing dirty greasy parts by hand, simply place the part to be cleaned in the basket close the lid turn it on and walk away, allowing other tasks to be carried out, the units are designed to work with a wide range of aqueous cleaning solutions and has a built in heating element which allows the fluid to be heated.

Manufactured from 304 stainless steel the units are robust and built to last

Redashe J40009.1 Washer 1150 E Power top loading parts cleaner

Redashe J40009.1 Washer 1150 E Power top loading parts cleaner

Redashe top loading parts cleaners are designed to free up technicians from washing dirty greasy parts by hand, simply place the part to be cleaned in the basket close the lid turn it on and walk away, allowing other tasks to be carried out, the units are designed to work with a wide range of aqueous cleaning solutions and has a built in heating element which allows the fluid to be heated.

Manufactured from 304 stainless steel the units are robust and built to last

Redashe J40010.1 Washer 900 E Power top loading parts cleaner

Redashe J40010.1 Washer 900 E Power top loading parts cleaner

Redashe top loading parts cleaners are designed to free up technicians from washing dirty greasy parts by hand, simply place the part to be cleaned in the basket close the lid turn it on and walk away, allowing other tasks to be carried out, the units are designed to work with a wide range of aqueous cleaning solutions and has a built in heating element which allows the fluid to be heated.

Manufactured from 304 stainless steel the units are robust and built to last

Redashe J40016.1 Washer 750 E Power top loading parts cleaner

Redashe J40016.1 Washer 750 E Power top loading parts cleaner

Redashe top loading parts cleaners are designed to free up technicians from washing dirty greasy parts by hand, simply place the part to be cleaned in the basket close the lid turn it on and walk away, allowing other tasks to be carried out, the units are designed to work with a wide range of aqueous cleaning solutions and has a built in heating element which allows the fluid to be heated.

Manufactured from 304 stainless steel the units are robust and built to last

Pages

Subscribe to RSS - Redashe