Warranty 12 month logo

Redashe N3020 anti-static gun

Redashe N3020 anti-static gun

The new IONSTAR antistatic-gun from Redashe neutralises static and cleans in one operation. Once connected to the compressed air system, it generates the necessary energy via an integrated turbine generator built into the air gun, creating a powerful stream of positive and negative ions. The IONSTAR requires no power cables or battery-packs.

Redashe N3001 anti-static gun

Redashe N3001 anti-static gun

Static electricity is a problem in many paintshops and many paint defects may be caused by this invisible problem. The Redashe anti-static gun will help eliminate static electricity, defects i.e. Dust and overspray clinging to the panel, these problems are easy to cure. Static electricity is generated during the repair process each time the DA passes over the surface a charge is generated, wiping the panel with a cloth, heating and cooling the panel.

Redashe NAS1650-RJ20S Spotblaster

Redashe NAS1650-RJ20S Spotblaster

Initial experience gained in rust control in the automotive field with a spot blaster system has led to Redashe’s development of a specially-adapted anti-static Spotblaster to cope with aircraft corrosion. The equipment, an air-powered closed system device, is the result of close co-operation with the RAF. It can be used almost anywhere on an aircraft, even in the most inaccessible areas, such as inside wings. Precise blasting pressure control ensures that no panel damage occurs.

EPP-UK Hydraulic Paper Baler

EPP-UK Hydraulic Paper Baler

The EPP-UK baler is a hydraulically powered baling machine for compaction of cardboard and plastic waste. The unit is powered from a single phase mains supply and controlled via a side mounted control box. This unit is fitted with a variety of interlocks and sensors to ensure safe operation by trained personnel.

Recommended for workshops, accident repair centres, manufacturing plants, logistics centres and multi product recycling plants.

TRB6300 Flexible Hybrid Polymer Hose 1/2’’ x 30m

TRB6300 Flexible Hybrid Polymer Hose 1/2’’ x 30m

This flexible hybrid polymer hose has zero memory allowing it to lay-flat and not work against you during operation.

Redashe IF-FAW-C-1000 Compact Mixing Room Increased Safety Heater

Redashe IF-FAW-C-1000 Compact Mixing Room Increased Safety Heater

The Redashe increased safety safety heaters feature all stainless steel or powder coated construction. Why do you need an increased safety heater? All areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified and marked with the 'EX' symbol. Most automotive paint manufacturers recommend that water based paints should be stored at an ambient temperature of not below 5°c and mixed above 15°c.

Redashe IF-FAW-C-750 Compact Mixing Room Increased Safety Heater

Redashe IF-FAW-C-750 Compact Mixing Room Increased Safety Heater

The Redashe increased safety safety heaters feature all stainless steel or powder coated construction. Why do you need an increased safety heater? All areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified and marked with the 'EX' symbol. Most automotive paint manufacturers recommend that water based paints should be stored at an ambient temperature of not below 5°c and mixed above 15°c.

Redashe IF-FAW-C-500 Compact Mixing Room Increased Safety Heater

Redashe IF-FAW-C-500 Compact Mixing Room Increased Safety Heater

The Redashe increased safety safety heaters feature all stainless steel or powder coated construction. Why do you need an increased safety heater? All areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified and marked with the 'EX' symbol. Most automotive paint manufacturers recommend that water based paints should be stored at an ambient temperature of not below 5°c and mixed above 15°c.

Redashe IF-FAW-C-250 Compact Mixing Room Increased Safety Heater

Redashe IF-FAW-C-250 Compact Mixing Room Increased Safety Heater

The Redashe increased safety safety heaters feature all stainless steel or powder coated construction. Why do you need an increased safety heater? All areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified and marked with the 'EX' symbol. Most automotive paint manufacturers recommend that water based paints should be stored at an ambient temperature of not below 5°c and mixed above 15°c.

Redashe IF-3000 Mixing Room Increased Safety Heater

Redashe IF-3000 Mixing Room Increased Safety Heater

The Redashe increased safety safety heaters feature all stainless steel or powder coated construction. Why do you need an increased safety heater? All areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified and marked with the 'EX' symbol. Most automotive paint manufacturers recommend that water based paints should be stored at an ambient temperature of not below 5°c and mixed above 15°c.

Redashe IF-2500 Mixing Room Increased Safety Heater

Redashe IF-2500 Mixing Room Increased Safety Heater

The Redashe increased safety safety heaters feature all stainless steel or powder coated construction. Why do you need an increased safety heater? All areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified and marked with the 'EX' symbol. Most automotive paint manufacturers recommend that water based paints should be stored at an ambient temperature of not below 5°c and mixed above 15°c.

Redashe IF-2000 Mixing Room Increased Safety Heater

Redashe IF-2000 Mixing Room Increased Safety Heater

The Redashe increased safety safety heaters feature all stainless steel or powder coated construction. Why do you need an increased safety heater? All areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified and marked with the 'EX' symbol. Most automotive paint manufacturers recommend that water based paints should be stored at an ambient temperature of not below 5°c and mixed above 15°c.

Redashe IF-1500 Mixing Room Increased Safety Heater

Redashe IF-1500 Mixing Room Increased Safety Heater

The Redashe increased safety safety heaters feature all stainless steel or powder coated construction. Why do you need an increased safety heater? All areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified and marked with the 'EX' symbol. Most automotive paint manufacturers recommend that water based paints should be stored at an ambient temperature of not below 5°c and mixed above 15°c.

Redashe IF-1000 Mixing Room Increased Safety Heater

Redashe IF-1000 Mixing Room Increased Safety Heater

The Redashe increased safety safety heaters feature all stainless steel or powder coated construction. Why do you need an increased safety heater? All areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified and marked with the 'EX' symbol. Most automotive paint manufacturers recommend that water based paints should be stored at an ambient temperature of not below 5°c and mixed above 15°c.

Redashe IF-750 Mixing Room Increased Safety Heater

Redashe IF-750 Mixing Room Increased Safety Heater

The Redashe increased safety safety heaters feature all stainless steel or powder coated construction. Why do you need an increased safety heater? All areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified and marked with the 'EX' symbol. Most automotive paint manufacturers recommend that water based paints should be stored at an ambient temperature of not below 5°c and mixed above 15°c.

Redashe IF-500 Mixing Room Increased Safety Heater

Redashe IF-500 Mixing Room Increased Safety Heater

The Redashe increased safety safety heaters feature all stainless steel or powder coated construction. Why do you need an increased safety heater? All areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified and marked with the 'EX' symbol. Most automotive paint manufacturers recommend that water based paints should be stored at an ambient temperature of not below 5°c and mixed above 15°c.

Redashe IF-250 Mixing Room Increased Safety Heater

Redashe IF-250 Mixing Room Increased Safety Heater

The Redashe increased safety safety heaters feature all stainless steel or powder coated construction. Why do you need an increased safety heater? All areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified and marked with the 'EX' symbol. Most automotive paint manufacturers recommend that water based paints should be stored at an ambient temperature of not below 5°c and mixed above 15°c.

Groz ZFSM2 flexible spout measure

Groz ZFSM2 flexible spout measure

Plastic measures for transferring metered quantities.

Redashe ZGRAVAD6 IBC gravity AdBlue dispensing kit

Redashe ZGRAVAD6 IBC gravity AdBlue dispensing kit

Designed specifically for use to dispense AdBlue from IBCs using the bottom outlet connection. Comes complete with all fittings/connections required, each kit includes swivelling S60x6 female buttress IBC adaptor (makes installation easy), ZABN34 Adblue Nozzle and 6m hose. 

Redashe ZGRAVAD4 IBC gravity AdBlue dispensing kit

Redashe ZGRAVAD4 IBC gravity AdBlue dispensing kit

Designed specifically for use to dispense AdBlue from IBCs using the bottom outlet connection. Comes complete with all fittings/connections required, each kit includes swivelling S60x6 female buttress IBC adaptor (makes installation easy), ZABN34 Adblue Nozzle and 4m hose. 

IRT R800443 4 PREPCURE

IRT R800443 4 PREPCURE

Speeds up the drying process of putty, filler and clearcoat with two digital timers.

Redashe YZ6185-PCR spring rewind cable reel

Redashe YZ6185-PCR spring rewind cable reel

The Redashe 240v spring rewind cable reel has been developed for the modern industrial, automotive and construction industries. They are a must to replace tangled extension cables and are designed for a more permanent solution to cable storage. These units give long lasting and trouble free performance.

Reelworks CSS808-525AB spring rewind Adblue Hose Reel

Reelworks CSS808-525AB spring rewind Adblue Hose Reel

The 808 series Adblue or DEF (diesel exhaust fluid) reel is a high performance spring rewind hose reels constructed in either heavy gauge powder coated steel or 304 stainless steel. Supplied with an externally mounted stainless steel swivel fitted with Viton seals. The 4-position roller guide arm adjusts for wall, overhead or ceiling mounting positions. Hose available on request.

Reelworks C808-525AB spring rewind Adblue Hose Reel

Reelworks C808-525AB spring rewind Adblue Hose Reel

The 808 series Adblue or DEF (diesel exhaust fluid) reel is a high performance spring rewind hose reels constructed in either heavy gauge powder coated steel or 304 stainless steel. Supplied with an externally mounted stainless steel swivel fitted with Viton seals. The 4-position roller guide arm adjusts for wall, overhead or ceiling mounting positions. Hose available on request.

Hans RAMPT-P1500 Magnetic pick-up tool

Hans RAMPT-P1500 Magnetic pick-up tool

Pick-up tool with telescopic shaft and magnetic pick-up head.

Groz ZFM2000 digital turbine flow meter

Groz ZFM2000 digital turbine flow meter

Digital turbine meter for low viscosity fluids, easy to install in line or for end of line applications.

Groz ZWM2000 Digital DEF turbine meter

Groz ZWM2000 Digital DEF turbine meter

Digital turbine meter with Polypropylene construction, designed especially for use with DEF (Diesel Exhaust Fluid), water etc.

IRT Infrared and UV curing

IRT Infrared and UV curing

IRT by Hedson offers a wide selection of Short-wave Infrared (IR) and ultraviolet (UVA) mobile dryers and each model has its own area of use. IRT products are user-friendly and are easy to move around in the workshop or can even be placed in the spray booth. For further details on the range, please don’t hesitate to contact Redashe

Herkules Flexible solutions for the workshop

Herkules Flexible solutions for the workshop

The perfect range of lifts suitable for body and paint shops as well as tyre shops. The lifts are easy to install and use the latest pneumatic lifting technology, making them silicone free (PWIS-Free which stands for paint-wetting impairment substances). Lifts the vehicle to the optimum working height to prevent fatigue and long term health problems by allowing the operative to work in an upright position, also increasing work efficiency. Can be mounted on-ground or in-ground to meet differing demands. For further details on the range, please don’t hesitate to contact Redashe.

Drester wheel washing equipment

Drester wheel washing equipment

Washing wheels is a profitable service that improves wheel balancing results and adds real customer value. The environmentally friendly Drester cleaning method washes all kinds of wheels and rims in a highly efficient yet gentle way once they have been removed from the vehicle. Keeping the working environment clean. For further details on the range, please don’t hesitate to contact Redashe.

Pages

Subscribe to RSS - 1 Year Warranty Logo