      |
Macnaught oil transfer equipment >
OIL TRANSFER EQUIPMENT – Air OPERATED PUMPS
R300T PUMP (DRUM)
R300S PUMP (STUB)
An air powered 3:1 ratio stub pump that delivers up to 23 litres (6 US gal) per minute (at the pump). This pump is ideal for workshops where fast flow is required, typically over distances of 10 metres (38ft) up to 30 meters (98ft) through one or two hose reels and meter/gun systems.
The R300T (Drum) and the R300S (Stub) pumps are ideally suited for the Macnaught HG Series Oil Control Guns (refer to pages 68/69) and Retracta hose reels. All models include an airline oil
lubricator.
Features:
| |
- Stub or Drum pump for inclusion in a workshop or mobile bulk oil system n 50mm (2") adjustable bung adaptor
- Suitable for use with oils to SAE 140, diesel, ethylene glycol (anti-freeze/anti-boil), kerosene and soft self collapsing greases
- Delivers up to 23 litres (6 us gal) per minute
- Oil Inlet 19mm (3/4") BSP (F) oil outlet 19mm (3/4") BSP (F)
- Optional TD42s suction tube
- Air inlet 6mm (1/4") BSP (F)
|
 |
|
Technical Data |
Wetted components: |
Aluminium, nitrile rubber, Carbon PTFE,zinc plated carbon steel and brass |
Pump ratio: |
3:1 (oil pressure is 3 times air pressure) |
Output: |
23 L/min (6 US gal per min) of SAE 10 oil at 690 kPa (100 psi) air pressure (free flow) |
Suction tube length: |
R300S (stub) 210 mm (81⁄2")
R300T (drum) 900 mm (351⁄2") |
Maximum Air Pressure: |
1030 kPa (150 psi, 10.3 bar) |
Minimum Air Pressure: |
400 kPa (60 psi, 4 bar) |
Minimum Air Compressor: |
0.16 m³/min (6 cfm) |
Air Inlet: |
1⁄4” NPT (F) |
Pump inlet: |
3⁄4” BSP or NPT (F) |
Pump Outlet: |
3⁄4” BSP or NPT (F) |
Foot valve inlet |
3⁄4” BSP or NPT (F) (stub only) |
PLEASE CLICK HERE TO VIEW THE LIST PRICES FOR THESE PRODUCTS |
Flow rates
Material |
Output through 3m (10ft) x 19mm (3/4") hose reel &
HG60 gun
Litres/Min (US GAL) |
Output through 3m (10ft) x 19mm ( 3/4") hose & 10m
(33ft) x 12.5mm (1/2")
Litres/Min (US GAL) |
|
OIL SAE 10 |
23 (6) |
15 (3.9) |
ATF |
OIL SAE 30 |
20 (5.2) |
9 (2.3) |
GTX3 |
OIL SAE 90 |
17 (4.4) |
6 (1.6) |
SP220 GEAR OIL |
OIL SAE 140 |
14 (3.7) |
4 (1) |
|
DIESEL |
23 (6) |
18 (4.7) |
|
KEROSENE |
22 (5.8) |
17 (4.5) |
|
Note:
1. Flow rates in litres per minute at 700kPa/100 PSI/7 BAR and 23°C.
2. Flow rates are a guide only and the actual output may vary from that stated.
3. Variations in flow rate can result from compressor volume, air pressure, hose construction, hose fittings, ambient conditions and system pipe work.
|
Grease couplers
Grease extension hoses
Air equipment
High pressure equipment
Manual equipment
Air line accessories
Oil control gun accessories
Suction tubes
Feeder hose
Fuel filters
Trolleys
General accessories
|
