
Groz grease nipples are manufactured to the most stringent quality standards - TS16949 approved. Fitting profile and dimensions are accurately controlled and conform to SAE, DIN,BS, JIS & IS standards. Grease fittings are heat treated to SAE J534 specification with hardness on greasing end to a minimum of 83 on Rockwell 15N scale with a case depth of 0.005" (0.13mm) to 0.009" (0.23mm). Fittings with ball check use heat treated springs for increased life. Steel fittings are plated in yellow zinc with a plating thickness of 0.0002" (5 microns) confirming to SAE J534 specification and have a guaranteed salt spray life of over 75 hours to red rust.
Part No. | Description | Thread length | Shank length | Overall length | Hex size |
ZGFTSS182845 | 1/8" BSPT 45˚ angle | 3.75mm min | 5.5mm max | 21mm max | 7/16" or 11mm |
ZGFTSS182745 | 1/8" NPT 45˚ angle | 5.6mm min | 7.6mm | 21.8mm | 7/16" |
ZGFTSS141945 | 1/4" BSPT 45˚ angle | 4.2mm min | 6.5mm | 22.5mm | 14mm or 9/16" |
ZGFTSS8145 | M8 x 1 taper 45˚ angle | 3.75mm min | 5.5mm max | 21mm max | 23/64" or 9mm |
ZGFTSS6145 | M6 x 1 taper 45˚ angle | 3.75mm min | 5.5mm max | 21mm max | 23/64" or 9mm |
ZGFTSS142845 UNF | 1/4" UN 45˚ angle | 3.3mm min | 5.1mm | 20.8mm | 3/8" |