Groz grease nipples are manufactured to the most stringent quality standards - TS16949 approved. Fitting profile and dimensions are accurately controlled and conform to SAE, DIN,BS, JIS & IS standards. Grease fittings are heat treated to SAE J534 specification with hardness on greasing end to a minimum of 83 on Rockwell 15N scale with a case depth of 0.005" (0.13mm) to 0.009" (0.23mm). Fittings with ball check use heat treated springs for increased life. Steel fittings are plated in yellow zinc with a plating thickness of 0.0002" (5 microns) confirming to SAE J534 specification and have a guaranteed salt spray life of over 75 hours to red rust.
| Part No. | Description | Thread length | Shank length | Overall length | Hex size |
| ZGFTSS182890 | 1/8" BSPT 90˚ degree angle | 3.75mm min | 5.5mm max | 18mm | 7/16" |
| ZGFTSS141990 | 1/4" BSPT 90˚ degree angle | 4.2mm min | 6.5mm | 22mm | 14mm or 9/16" |
| ZGFTSS6190 | M6 x 1 taper 90˚ degree angle | 3.75mm min | 5.5mm max | 18mm max | 23/64" or 9mm |
| ZGFTSS8190 | M8 x 1 taper 90˚ degree angle | 3.75mm min | 5.5mm max | 18mm max | 23/64" or 9mm |
| ZGFTSS1428 90UNF | 1/4" UNF 90˚ degree angle | 4.6mm min | 5.9mm | 18.55mm | 23/64" or 9mm |
| ZGFTSS182790 | 1/8" NPT 90˚ degree angle | 5.6mm min | 7.6mm | 21.3mm | 7/16" |
