Redashe Logo

Herkules HLS1200 Car Lift

Herkules HLS1200 Car Lift

The lifting and lowering of the working height is done safely and smoothly with a Herkules HLS 1200 by Hedson and increases the access to damaged areas and the ergonomic work process. This lift is available in three types for different demands – on-ground, flush mounted and rail transportation. These lifts are easy to install and facilitate an individual planning of body shops by using the existing space optimally. Due to the low construction height, it is easy to drive the vehicles on & off of the lift.

R230508 Drester Granule Filter

R230508 Drester Granule Filter

The Drester Granule Filter by Hedson has been designed to work with all Drester wheel washers to prevent granules from ending up in the drain. Simply connect the filter on to the end of the drain hose. The filter collects the granules, which both saves money & the environment.

R230315 Drester Quick Lift

R230315 Drester Quick Lift

With the innovative and pioneering Drester Quick Lift by Hedson (patent pending) and together with the door loading system of the Drester Grand Prix range of wheel washers by Hedson takes a major leap forward in ergonomic wheel handling. The Quick Lift loads a heavy wheel in less than 3 seconds, and it can easily be adapted to models from the Drester Grand Prix series of washers.

R230794 Drester DoublePower Granules

R230794 Drester DoublePower Granules

Only water and the new Drester DoublePower granules are used to wash wheels in the Drester wheel washers by Hedson. The water and granules are flushed onto the rotating wheel with pressure. The Drester DoublePower granule uses different textured granules to optimize the washing process; the characteristics of the mix of granules are crucial for an excellent cleaning performance. The Drester cleaning method with granules is an environmentally friendly and offers time efficient cleaning technology. Neither detergents or chemicals are required in this process.

RGP12 Drester GP 12 Silverstone Wheel Washer

RGP12 Drester GP 12 Silverstone Wheel Washer

Get both clean wheels and a clean conscience with RGP12 wheel washer from Drester by Hedson. The water consumption per washed wheel is very low and no chemicals are that can be harmful for the user or the environment. The plastic granules (Drester DoublePower by Hedson) are made of a disposable material. With the innovative and pioneering Drester Quick Lift (optional extra) by Hedson (patent pending), together with the door loading system of the Drester Grand Prix by Hedson wheel washers, Hedson takes a major leap forward in ergonomic wheel handling.

RGP10 Drester GP 10 Monza Wheel Washer

RGP10 Drester GP 10 Monza Wheel Washer

Get both clean wheels and a clean conscience with RGP10 wheel washer from Drester by Hedson. The water consumption per washed wheel is very low and no chemicals are that can be harmful for the user or the environment. The plastic granules (Drester DoublePower by Hedson) are made of a disposable material. With the innovative and pioneering Drester Quick Lift (optional extra) by Hedson (patent pending), together with the door loading system of the Drester Grand Prix by Hedson wheel washers, Hedson takes a major leap forward in ergonomic wheel handling.

RW450 Drester Powerwash Wheel Washer

RW450 Drester Powerwash Wheel Washer

The RW450 is a compact and easy to use wheel washer suitable for every workshop where tires are handled. The advanced fixed nozzle geometry enables efficient cleaning of all types of wheels. This space saving wheel washer works with a closed water system. This means that the machine can be placed anywhere in the shop, so no requirement for a water connection or drain next to the machine. The water consumption per washed wheel is very low, 1 litre per wheel.

R800625 IRT 2 Prepcure (Handheld)

R800625 IRT 2 Prepcure (Handheld)

The IRT 1 Prepcure is suitable for curing minor paint & panel work, as well as for applying & removing stickers. The dryers can either be used as a hand-held dryer or be mounted on stand (Optional). Can cure all base & paint materials. The on/off button is integrated in the handle & the stand is fitted with a manual timer.

R800624 IRT 1 Prepcure (Handheld)

R800624 IRT 1 Prepcure (Handheld)

The IRT 1 Prepcure is suitable for curing minor paint & panel work, as well as for applying & removing stickers. The dryers can either be used as a hand-held dryer or be mounted on stand (Optional). Can cure all base & paint materials. The on/off button is integrated in the handle & the stand is fitted with a manual timer.

Herkules HM1100 Car Lift

Herkules HM1100 Car Lift

The Herkules HM 1100 car lift requires no installation unless fitted in-ground to concrete or grids, but if fitted on-ground the lift is ready to use immediately. And with an additional set of wheels and pole handle (optional) it is mobile in the shop. The lift is equipped with swivel arms which easily reach the vehicles’ original lifting points. The radius of the swivel arms also allows for a safe fixing of wide vehicles.

Herkules Painter Lift

Herkules Painter Lift

The Herkules Painter Lift offers a secure platform area and ergonomic working position for painters when working on large high sided vehicles. The wheels on the lift make it easy to move around in the workshop. Due to its construction, the lift is excellent for small spaces in the prep area as well as in the spray booth. On the platform of the lift there are several air supplies as well as storage space for, therefore they are always within reach.

R715070-UK IRT UV SMARTCURE

R715070-UK IRT UV SMARTCURE

The UV Smartcure is a robust hand held battery-powered UV curing device developed using the decades of experience of curing paints of all types with UV & Infra-red lamps. It combines the latest UV LED technology. Constructed from a tough glass fibre filled polymer, the unit is fitted with a 3mm scratch solvent resistant tempered glass with a fibre reinforced frame to prevent damage, to the units high performance UV-LED’s.

Redashe N3020 anti-static gun

Redashe N3020 anti-static gun

The new IONSTAR antistatic-gun from Redashe neutralises static and cleans in one operation. Once connected to the compressed air system, it generates the necessary energy via an integrated turbine generator built into the air gun, creating a powerful stream of positive and negative ions. The IONSTAR requires no power cables or battery-packs.

Redashe N3001 anti-static gun

Redashe N3001 anti-static gun

Static electricity is a problem in many paintshops and many paint defects may be caused by this invisible problem. The Redashe anti-static gun will help eliminate static electricity, defects i.e. Dust and overspray clinging to the panel, these problems are easy to cure. Static electricity is generated during the repair process each time the DA passes over the surface a charge is generated, wiping the panel with a cloth, heating and cooling the panel.

Redashe NAS1650-RJ20S Spotblaster

Redashe NAS1650-RJ20S Spotblaster

Initial experience gained in rust control in the automotive field with a spot blaster system has led to Redashe’s development of a specially-adapted anti-static Spotblaster to cope with aircraft corrosion. The equipment, an air-powered closed system device, is the result of close co-operation with the RAF. It can be used almost anywhere on an aircraft, even in the most inaccessible areas, such as inside wings. Precise blasting pressure control ensures that no panel damage occurs.

EPP-UK Hydraulic Paper Baler

EPP-UK Hydraulic Paper Baler

The EPP-UK baler is a hydraulically powered baling machine for compaction of cardboard and plastic waste. The unit is powered from a single phase mains supply and controlled via a side mounted control box. This unit is fitted with a variety of interlocks and sensors to ensure safe operation by trained personnel.

Recommended for workshops, accident repair centres, manufacturing plants, logistics centres and multi product recycling plants.

TRB6300 Flexible Hybrid Polymer Hose 1/2’’ x 30m

TRB6300 Flexible Hybrid Polymer Hose 1/2’’ x 30m

This flexible hybrid polymer hose has zero memory allowing it to lay-flat and not work against you during operation.

Redashe IF-FAW-C-1000 Compact Mixing Room Increased Safety Heater

Redashe IF-FAW-C-1000 Compact Mixing Room Increased Safety Heater

The Redashe increased safety safety heaters feature all stainless steel or powder coated construction. Why do you need an increased safety heater? All areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified and marked with the 'EX' symbol. Most automotive paint manufacturers recommend that water based paints should be stored at an ambient temperature of not below 5°c and mixed above 15°c.

Redashe IF-FAW-C-750 Compact Mixing Room Increased Safety Heater

Redashe IF-FAW-C-750 Compact Mixing Room Increased Safety Heater

The Redashe increased safety safety heaters feature all stainless steel or powder coated construction. Why do you need an increased safety heater? All areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified and marked with the 'EX' symbol. Most automotive paint manufacturers recommend that water based paints should be stored at an ambient temperature of not below 5°c and mixed above 15°c.

Redashe IF-FAW-C-500 Compact Mixing Room Increased Safety Heater

Redashe IF-FAW-C-500 Compact Mixing Room Increased Safety Heater

The Redashe increased safety safety heaters feature all stainless steel or powder coated construction. Why do you need an increased safety heater? All areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified and marked with the 'EX' symbol. Most automotive paint manufacturers recommend that water based paints should be stored at an ambient temperature of not below 5°c and mixed above 15°c.

Redashe IF-FAW-C-250 Compact Mixing Room Increased Safety Heater

Redashe IF-FAW-C-250 Compact Mixing Room Increased Safety Heater

The Redashe increased safety safety heaters feature all stainless steel or powder coated construction. Why do you need an increased safety heater? All areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified and marked with the 'EX' symbol. Most automotive paint manufacturers recommend that water based paints should be stored at an ambient temperature of not below 5°c and mixed above 15°c.

Redashe IF-3000 Mixing Room Increased Safety Heater

Redashe IF-3000 Mixing Room Increased Safety Heater

The Redashe increased safety safety heaters feature all stainless steel or powder coated construction. Why do you need an increased safety heater? All areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified and marked with the 'EX' symbol. Most automotive paint manufacturers recommend that water based paints should be stored at an ambient temperature of not below 5°c and mixed above 15°c.

Redashe IF-2500 Mixing Room Increased Safety Heater

Redashe IF-2500 Mixing Room Increased Safety Heater

The Redashe increased safety safety heaters feature all stainless steel or powder coated construction. Why do you need an increased safety heater? All areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified and marked with the 'EX' symbol. Most automotive paint manufacturers recommend that water based paints should be stored at an ambient temperature of not below 5°c and mixed above 15°c.

Redashe IF-2000 Mixing Room Increased Safety Heater

Redashe IF-2000 Mixing Room Increased Safety Heater

The Redashe increased safety safety heaters feature all stainless steel or powder coated construction. Why do you need an increased safety heater? All areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified and marked with the 'EX' symbol. Most automotive paint manufacturers recommend that water based paints should be stored at an ambient temperature of not below 5°c and mixed above 15°c.

Redashe IF-1500 Mixing Room Increased Safety Heater

Redashe IF-1500 Mixing Room Increased Safety Heater

The Redashe increased safety safety heaters feature all stainless steel or powder coated construction. Why do you need an increased safety heater? All areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified and marked with the 'EX' symbol. Most automotive paint manufacturers recommend that water based paints should be stored at an ambient temperature of not below 5°c and mixed above 15°c.

Redashe IF-1000 Mixing Room Increased Safety Heater

Redashe IF-1000 Mixing Room Increased Safety Heater

The Redashe increased safety safety heaters feature all stainless steel or powder coated construction. Why do you need an increased safety heater? All areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified and marked with the 'EX' symbol. Most automotive paint manufacturers recommend that water based paints should be stored at an ambient temperature of not below 5°c and mixed above 15°c.

Redashe IF-750 Mixing Room Increased Safety Heater

Redashe IF-750 Mixing Room Increased Safety Heater

The Redashe increased safety safety heaters feature all stainless steel or powder coated construction. Why do you need an increased safety heater? All areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified and marked with the 'EX' symbol. Most automotive paint manufacturers recommend that water based paints should be stored at an ambient temperature of not below 5°c and mixed above 15°c.

Redashe IF-500 Mixing Room Increased Safety Heater

Redashe IF-500 Mixing Room Increased Safety Heater

The Redashe increased safety safety heaters feature all stainless steel or powder coated construction. Why do you need an increased safety heater? All areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified and marked with the 'EX' symbol. Most automotive paint manufacturers recommend that water based paints should be stored at an ambient temperature of not below 5°c and mixed above 15°c.

Redashe IF-250 Mixing Room Increased Safety Heater

Redashe IF-250 Mixing Room Increased Safety Heater

The Redashe increased safety safety heaters feature all stainless steel or powder coated construction. Why do you need an increased safety heater? All areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified and marked with the 'EX' symbol. Most automotive paint manufacturers recommend that water based paints should be stored at an ambient temperature of not below 5°c and mixed above 15°c.

Redashe ZGRAVAD6 IBC gravity AdBlue dispensing kit

Redashe ZGRAVAD6 IBC gravity AdBlue dispensing kit

Designed specifically for use to dispense AdBlue from IBCs using the bottom outlet connection. Comes complete with all fittings/connections required, each kit includes swivelling S60x6 female buttress IBC adaptor (makes installation easy), ZABN34 AdBlue Nozzle and 6m hose. 

Pages

Subscribe to RSS - Redashe