Grease handling equipment

Groz 45 degree angle steel grease nipples

Groz

Description

45 degree angle steel grease nipples

Groz grease nipples are manufactured to the most stringent quality standards – TS16949 approved. Fitting profile and dimensions are accurately controlled and conform to SAE, DIN,BS, JIS & IS standards. Grease fittings are heat treated to SAE J534 specification with hardness on greasing end to a minimum of 83 on Rockwell 15N scale with a case depth of 0.005" (0.13mm) to 0.009" (0.23mm). Fittings with ball check use heat treated springs for increased life. Steel fittings are plated in yellow zinc with a plating thickness of 0.0002" (5 microns) confirming to SAE J534 specification and have a guaranteed salt spray life of over 75 hours to red rust.

Available models

Part No. Description Thread length Shank length Overall length Hex size
ZGFT142845UNF 1/4" UNF 45 degree angle 3.3mm min 5.1mm 20.8mm 3/8"
ZGFT182745 1/8" NPT 45 degree angle 5.6mm min 7.6mm 21.8mm 7/16"
ZGFT141845 1/4" PTF 45 degree angle 5.75mm 9.27mm 29.74mm 9/16"
ZGFTR182845 1/8" BSPT 45 degree angle 3.75mm min 5.5mm max 21mm max 11mm
ZGFTR141945 1/4" BSPT 45 degree angle 4.2mm 6.5mm 22.5mm 9/16" or 14mm
ZGFT8145 M8 x 1 45 degree angle 3.75mm min 5.5mm max 21mm max 9mm
ZGFT6145 M6 x 1 degree angle 3.75mm min 5.5mm max 21mm max 9mm