Several component parts on a customers’ pizza dough production line required regular cleaning as they get contaminated with the dough mixture.
This parts cleaning process is time-consuming and involves manual handling of heavy items such as 30kg, 1.2 meter-long mixing augers. This posed a health and safety risk. The size and weight of the mixing augers meant that they were currently cleaned by water being run down them onto the wash area floor below.
Redashe’ s Chris Freeman was called to site to find a solution to remove this health and safety risk. Chris proposed the 1150E and 1800E power wash, top-loading parts cleaners from the Redashe range. Both units are made from stainless steel, but would require their control boxes to be modified to meet the hygienic design required.
All electrical connections were also upgraded to IP67 standard to make the parts cleaners resistant to the area’s washdown process.
To clean the large, mixing augers using the 1800 E unit, a bespoke roll-in, roll-off working platform was designed and manufactured .
Once the customisations had been made to the cleaners, the units were delivered to site and plumbed into the hot water supply, where parts can now be cleaned effectively and efficiently.
Resulting in our customer being extremely satisfied with their shorter & safer cleaning process.
For further information on our range of the latest Parts Cleaning Washers or to arrange a site visit, please contact the Redashe Sales team either on 01252-785010 or by email info@redashe.com.