The R1000 10:1 ratio oil ratio pump is the latest addition to the range and has been designed for workshops and systems requiring oil transfer of distances up to 100 metres. It is ideally suited for use with bulk tanks and drums and utilising multiple hose reels and meter/gun dispensing systems.
Note
1.ยรรขFlow rates in litres per minute at 700kPa / 100psi / 7bar and 23รฅยกC
2.ยรรขFlow rates are a guide only and the actual output may vary from that stated
3.ยรรขVariations in flow rate can result from compressor volume, air pressure, hose construction, hose fittings, ambient conditions and system pipe work
| Wetted components | Aluminium, nitrile rubber, carbon PTFE, zinc plated carbon steel and brass |
| Pump ratio | 10:1 (oil pressure is 10x the air pressure) |
| Output | 15 litres (4 US gal.) per min. of SAE 10 oil at 100psi air pressure (free flow) |
| Dimensions | 605mm x 120mm x 120mm |
| Max. air pressure | 1030 kPa / 150psi / 10.3 bar |
| Min. air pressure | 400 kPa / 60psi / 4 bar |
| Min. air compressor | 0.50 mรฅ?/min (18 cfm/min) |
| Air inlet | 1/4" BSP (F) |
| Pump outlet: | 3/4" BSP or NPT (F) |
| Material | Output (per min.) through 1m x 25mm (1") hose and hose end gun @ 550kPa/80psi Litres (US gal) per min | Output (per min.) through 35m (115ft) x 12.5mm (1/2") hose and hose end gun @ 690kPa/100psi Litres (US gal) per min |
| Oil SAE 10 | 15 (4) | 10 (2.6) |
| Oil SAE 30 | 15 (4) | 6 (1.6) |
| Oil SAE 90 | 14 (3.7) | 4.6 (1.2) |
